|
|
|
YEAR: 1975 |
MAKE: Fruehauf |
|
MODEL: Double Conical |
D.O.T. CODE: MC-306 |
|
D.O.T. SPEC: Aluminum |
CAPACITY: 8800 gallon |
|
COMPARTMENTS: 1 |
BULKHEADS: N/A |
|
COMPT. SIZES: 8800 |
OVERALL LENGTH: 41’ |
|
FENDERS: Aluminum front and rear |
SUSPENSION TYPE: Spring |
|
BRAKES: S-cam @40+% |
SLACK ADJUSTERS: Automatic |
|
TIRE SIZE: 11R22.5@40+% |
WHEELS: Aluminum Budd |
|
PIPING: 4” |
EMERGENCY VALVES: Air |
|
DISCHARGE: Curbside API |
Type of overfill protection system:
Scully Go-Anywhere |
|
LANDING LEGS: Two-speed |
TIRE CARRIER: N/A |
|
HOSE CARRIERS: (2) troughs curbside: (1)
21’ and (1) 10’. (1) 8”x21’ tube streetside. (1) Core holder
curbside.
|
TEST DATES: V-K: 12/05
I-P: 10/03
DOT Federal Highway tests: 12/05 |
|
BOTTOM LOAD: Yes |
VAPOR RECOVERY: (1) outlet |
CABINET: (1) 24”x24” curbside
|
PAINT: None – natural aluminum |
|
COMMENTS:
Previously hauled Jet-A. Very nice, clean
trailer. Above average. (Converted 4 compartment to one
compartment). Pumping system installed by Seneca Tank June 2006.
See attached. |
SINGLE PUMPING SYSTEM
Pump (1)
Size: 2” Streetside
Model: 82D1-L48 EE-X
Gorman Rupp – Yanmar Diesel
Line Strainer (1) 2”
PT Aluminum
Delivery Hose (1) 1” x 50’
Streetside
Nozzle (1) 1” 7H OPW
Automatic Streetside
Filter
(1) 5290 10 Micron 70020 – 40 GPM Cimtech
Meter (1) L.C.
ý Size 2” 100 GPM Ticket
Printer ý Streetside
State Split
Required No
ý
Pressure Gauge Installed on
pumping system to monitor pump pressure
Hose Reel (1) Spring rewind
ý Streetside Cabinet
ý
Delivery
Hose (1) 1" OPW ý
Streetside
Swivel
Spit Tank (1) Streetside
ý Aluminum tank with sight
tube.
Suction Hose (1) 2” to curbside
unload area – provisions to secure hose and dry break coupler.
Dry Break
(4) 2” Emco Wheaton dry break adapters installed on API unload caps.
Equipment Cabinet
(1) 72” aluminum bolt-on cabinet with single lift-up door with hydraulic
struts.
Installed on streetside of trailer with all
aluminum mounting structure.
Pumping System Installed in streetside equipment
cabinet, victualic plumbing.
System test run and meter calibrated to diesel.
Pumping System
Warranty All equipment per manufacturer’s
warranty (typically one year).
Trailer Warranty – As Is. Manufacturing
systems warranty as apply.
____________________________________________________________________________________
trailer will be sold------“AS IS”
BROKERAGE
$call
F.O.B. Des Moines, IA
TANK: As
is.
PUMPING SYSTEM:
As is.
CHASSIS:
As accepted. Customer inspection
required at delivery.
Specifications subject to verification
______________________________________________________________________________________
TO PLACE THIS UNIT ON HOLD:
1.
Please sign below where indicated and return to us by fax at
515/264-4358 within 24 hours. This unit is on verbal hold for 24 hours.
Verbal hold will expire at the end of the 24 hour period without this
signed page and the unit will be available for sale.
2.
Call us with a credit card number that we can receive $1,500.00
down payment from. This unit will then be placed on hold for (1) calendar
week from date of receipt of your credit card charge.
3.
If a decision is made to purchase the unit within the week
following the receipt of your down payment, an additional 20% down payment
or credit approval will be required.
4.
If a decision is not made within the week following the receipt of
your down payment, your down payment will be refunded and the hold will
expire.
5.
If the decision is made not to purchase the unit upon inspection,
your down payment of $1,500.00 will be refunded.
6.
Once the unit is complete, final payment will be required at time
of pick up or within 2 weeks of completion.
Customer Acceptance:
___________________________________ Date: ___________
Seneca Tank Acceptance: ________________________________ Date:
___________
